Machines & Steel Blades TFI Co.
Contact us

Press Brake Tools and Bending Tools

Press brake punches, dies and multi-V matrices for Promecam, Amada, Trumpf, Bystronic and Hämmerle, in C45 or 42CrMo, hardened to 50-60 HRC.

Steel Blades & Machine Knives 6 min read Updated

Press brake punches, dies and multi-V matrices for Promecam, Amada, Trumpf, Bystronic and Hämmerle, in C45 or 42CrMo, hardened to 50-60 HRC.

Steel Blades & Machine Knives 6 min read Updated

Segmented EU4416 gooseneck punches mounted in a press brake, marked TFI Co. with their lengths
Segmented EU4416 gooseneck punches mounted in a press brake.
On this page
  1. Press brake tools at a glance
  2. Punches (upper tools)
  3. Dies and bending matrices (lower tools)
  4. Gooseneck tools for boxes and U-channels
  5. Steel and hardness
  6. Machines and systems we make tools for
  7. Special tools
  8. Services
  9. What to send for a quotation
  10. Where we deliver
  11. Frequently asked questions
  12. More about our press brake tools

TFI Co. makes press brake tools: the punches (upper tools), dies and bending matrices (lower tools) that shape sheet metal on a press brake. We have made steel blades and machine tools since 1965, and our bending tools fit the machines most workshops run: Euro-style (Promecam / Amada), Trumpf / Wila, Bystronic, LVD, Baykal, Ermak and Hämmerle.

We make standard tools and custom tools to your drawing, including tools for older machines whose original maker no longer supplies them, which we reverse-engineer from your sample.

Press brake tools at a glance

FeatureWhat we offer

Upper tools
Straight, acute and gooseneck punches, segmented sets, moving horns
Lower tools
Single-V, 2V and multi-V dies, bending matrices, rotary (anti-mark) dies, hemming dies
Punch angles
30°, 60°, 85°, 88° and 90°
Machines
Euro-style (Promecam / Amada), Trumpf / Wila, Bystronic, LVD, Baykal, Ermak, Hämmerle
Steel
High-grade alloy steel such as C45 or 42CrMo
Hardness
Working surfaces induction-hardened to 50-60 HRC
Lengths
Full length (for example 3150 mm), segmented sets or custom lengths
Custom work
Tools made to your drawing or reverse-engineered from a sample

FeatureWhat we offer

Upper tools
Straight, acute and gooseneck punches, segmented sets, moving horns
Lower tools
Single-V, 2V and multi-V dies, bending matrices, rotary (anti-mark) dies, hemming dies
Punch angles
30°, 60°, 85°, 88° and 90°
Machines
Euro-style (Promecam / Amada), Trumpf / Wila, Bystronic, LVD, Baykal, Ermak, Hämmerle
Steel
High-grade alloy steel such as C45 or 42CrMo
Hardness
Working surfaces induction-hardened to 50-60 HRC
Lengths
Full length (for example 3150 mm), segmented sets or custom lengths
Custom work
Tools made to your drawing or reverse-engineered from a sample
Press brake punches and dies of different profiles standing on a workbench
Press brake punches and dies of different profiles.

Punches (upper tools)

PunchUsed for

Straight punch
Standard bends at 85°, 88° or 90°
Acute punch
Sharp angles such as 30° or 45°, and the first step of hemming
Gooseneck punch
Deep U-channels and boxes: the curved body leaves room for flanges that are already bent
Segmented punch set
Sections of standard lengths combined to match the length of the bend
Moving horns
Bending boxes and closed profiles

PunchUsed for

Straight punch
Standard bends at 85°, 88° or 90°
Acute punch
Sharp angles such as 30° or 45°, and the first step of hemming
Gooseneck punch
Deep U-channels and boxes: the curved body leaves room for flanges that are already bent
Segmented punch set
Sections of standard lengths combined to match the length of the bend
Moving horns
Bending boxes and closed profiles
Straight press brake punches of different heights and tip angles
Straight press brake punches of different heights and tip angles.

Dies and bending matrices (lower tools)

  • Single-V (1V)

    How it works
    One V-groove
    Best for
    Many angles and radii; retooling when the job changes
  • 2V die

    How it works
    Two V-grooves side by side
    Best for
    Two bend sizes without retooling; short flanges
  • Multi-V matrix

    How it works
    V-grooves on four sides; rotate the block to change
    Best for
    Many sheet thicknesses with one tool; not for very short flanges
  • Rotary (roller) die

    How it works
    Rotating inserts on both sides of the V
    Best for
    Stainless, aluminium and painted sheet without marks or scratches
  • Hemming die

    How it works
    Flattens a pre-bent flange
    Best for
    Closing and safety hems
  • Single-V (1V)

    How it works
    One V-groove
    Best for
    Many angles and radii; retooling when the job changes
  • 2V die

    How it works
    Two V-grooves side by side
    Best for
    Two bend sizes without retooling; short flanges
  • Multi-V matrix

    How it works
    V-grooves on four sides; rotate the block to change
    Best for
    Many sheet thicknesses with one tool; not for very short flanges
  • Rotary (roller) die

    How it works
    Rotating inserts on both sides of the V
    Best for
    Stainless, aluminium and painted sheet without marks or scratches
  • Hemming die

    How it works
    Flattens a pre-bent flange
    Best for
    Closing and safety hems
Drawing of press brake dies: single-V, two-V and four-way multi-V matrix profiles
Single-V, two-V and four-way multi-V die profiles.

The 4-way bending matrix 95 × 95 × 3150 mm

For 3-metre Euro-style press brakes such as the Promecam 3150, we make a 4-way multi-V matrix with a 95 × 95 mm square section and a 3150 mm length, as one solid piece or in sections. Instead of changing the die for a different sheet thickness, the operator turns the matrix 90° or 180° to the right V-opening.

V-openingSheet thickness

V16, V25, V40
Thin to medium sheet, about 1.5 to 4 mm
V63, V80
Heavy plate, about 5 to 8 mm and more, at 85° or 88°

V-openingSheet thickness

V16, V25, V40
Thin to medium sheet, about 1.5 to 4 mm
V63, V80
Heavy plate, about 5 to 8 mm and more, at 85° or 88°
Multi-V bending matrix: a long steel die block with V-grooves on several sides
A multi-V bending matrix with V-grooves on several sides.

Gooseneck tools for boxes and U-channels

A gooseneck punch has a deep, curved relief in its body, so the sheet does not hit the punch when a flange comes back up. That makes it the tool for deep U-channels, enclosures and boxes bent in several steps. Our EU4416 Euro-style gooseneck punch comes in segmented lengths, so the operator can set up exactly the bending length of the part.

Because the force does not run straight down through the curved body, a gooseneck punch carries less tonnage than a straight punch of the same height. Always check the load limit of the tool for your sheet thickness.

Drawing of gooseneck punch profiles with deep curved reliefs for return flanges
Gooseneck punch profiles with deep reliefs for return flanges.

Steel and hardness

Our punches and dies are made from high-grade alloy steels such as C45 or 42CrMo. The parts that touch the sheet, the punch tip and the shoulders of the V, are induction-hardened to 50-60 HRC (52-60 HRC on the V-grooves of a multi-V matrix). The hard surface resists wear, while the tougher core takes the bending load without cracking.

Machines and systems we make tools for

SystemWhat to know

Euro-style (Promecam / Amada)
The most widely used standard. Punches have a safety groove so they cannot drop when the clamp opens; dies sit on a 60 mm wide base. Also fits Accurpress.
Trumpf / Wila
Tools for Trumpf and Wila clamping
Bystronic
Bystronic-style punches and dies
Hämmerle (Bystronic)
3-point bending tools for very high angle accuracy, reverse-engineered for older machines
LVD, Ermak, Baykal
Tools to the machine's clamping, for example an 85° straight punch for Baykal

SystemWhat to know

Euro-style (Promecam / Amada)
The most widely used standard. Punches have a safety groove so they cannot drop when the clamp opens; dies sit on a 60 mm wide base. Also fits Accurpress.
Trumpf / Wila
Tools for Trumpf and Wila clamping
Bystronic
Bystronic-style punches and dies
Hämmerle (Bystronic)
3-point bending tools for very high angle accuracy, reverse-engineered for older machines
LVD, Ermak, Baykal
Tools to the machine's clamping, for example an 85° straight punch for Baykal
Hämmerle-style press brake die made by TFI Co., with mounting holes
A Hämmerle-style die made by TFI Co.

Special tools

  • Hemming and flanging tools for closed edges and flanges.

  • Hinge-making, curling and flattening tools.

  • Louver punch and die sets for ventilation grilles.

  • Punch and die sets for Peddinghaus punching and shearing machines, measured and made to fit the machine's die holder.

  • Anti-mark film orange polyurethane film in 30 m rolls that keeps the die from marking the sheet.

  • Hemming and flanging tools for closed edges and flanges.

  • Hinge-making, curling and flattening tools.

  • Louver punch and die sets for ventilation grilles.

  • Punch and die sets for Peddinghaus punching and shearing machines, measured and made to fit the machine's die holder.

  • Anti-mark film orange polyurethane film in 30 m rolls that keeps the die from marking the sheet.

Drawing of press brake hemming dies for closing flanges
Hemming dies for closing flanges.
Caliper measuring an oval punching die for a Peddinghaus machine
Checking the size of a punch and die set for a Peddinghaus machine.

Services

  • Technical advice on the right tool, V-opening and bend limits for your parts.

  • Re-sharpening and reconditioning of worn tools.

  • Press brake repair, including hydraulic systems.

  • Technical advice on the right tool, V-opening and bend limits for your parts.

  • Re-sharpening and reconditioning of worn tools.

  • Press brake repair, including hydraulic systems.

What to send for a quotation

InformationExample

Machine make, model and tonnage
Promecam, 100 t
Bed length and clamping system
3150 mm, Euro-style
Tool type
Gooseneck punch, multi-V die
Angle and V-opening
88°, V16
Material and thickness you bend
Mild steel, 3 mm
Length
Full length or segmented set
Drawing or photo with measurements
For custom or older tools
Quantity and delivery country
1 set, Saudi Arabia

InformationExample

Machine make, model and tonnage
Promecam, 100 t
Bed length and clamping system
3150 mm, Euro-style
Tool type
Gooseneck punch, multi-V die
Angle and V-opening
88°, V16
Material and thickness you bend
Mild steel, 3 mm
Length
Full length or segmented set
Drawing or photo with measurements
For custom or older tools
Quantity and delivery country
1 set, Saudi Arabia

Request a quotationSend us your drawing on WhatsApp

Where we deliver

We supply press brake tools across the GCC (the UAE, Saudi Arabia, Qatar, Kuwait and Oman) and have delivered to Canada, Belarus, Russia, France, Australia, Japan, Brazil and India, and to other countries on request.

Frequently asked questions

Which tools fit my press brake?

It depends on the clamping system. Most machines use the Euro-style (Promecam / Amada) standard; others use Trumpf / Wila, Bystronic or their own system. Send us the machine make and model, or a photo of the clamp, and we match the tools.

Which V-opening should I use?

As a guide from our 95 × 95 mm matrix: V16 to V40 for sheet of about 1.5 to 4 mm, V63 or V80 for plate of about 5 to 8 mm and more. We confirm the right opening for your material and angle.

What is a gooseneck punch for?

For deep U-channels and boxes: its curved body leaves space for flanges that are already bent. It carries less load than a straight punch, so check the tonnage limit.

Single-V or multi-V die?

A single-V die is simple and suits short flanges. A multi-V matrix has openings on four sides, so one tool covers many thicknesses; you turn it instead of changing it.

Can you make tools for an old machine?

Yes. We reverse-engineer tools from a sample or a drawing, for example for older Hämmerle press brakes and Peddinghaus punching machines.

How hard are the tools?

The working surfaces are induction-hardened to 50-60 HRC on C45 or 42CrMo alloy steel.

More about our press brake tools

Menu

Blades

Company

Our network

Talk to us

Menu

Blades

Company

Our network

Talk to us